Transmitter: 4-Channel minimum, 6-Channel
preferred
*With 4-Ch system a “Y” harness, such as HP-WR-013, is
required to connect the two wing servos. Servo mixing is not possible.
Receiver: 4-Channel minimum, 6-Channel preferred
Servos: 4 Micro Servos 9g~18g ea
*Suggest Waypoint W-092MB x4
Servo extensions / wires:
2x 20cm extensions for Wing Servos
1x 30cm extensions for Elevator Servo
*Suggest #HP-WR-004
*Suggest #HP-WR-005
Power Setup: For “eye-popping” performance, use: Motor
Hyperion HP-Z3019-12
TITAN 50A BEC Brushless Electronic Speed Controller (ESC)
Prop adapter HP-ADAP-50L
(the above are available with motor connectors as a “full
set” at discount in most shops)
SEE PROP RECOMMENDATIONS BELOW
Battery: 2100~3300mAh, Lithium with 20C rating
*Suggest Hyperion LVX2500-3S for max Aerobatic/3D performance, or
LVX3300-3S in sport aerobatics/3D for longer flights (3D maniacs
may also choose LVX2100 lightest option)
Suggested connectors:
Motor<>ESC: 3.5mm Gold Bullet Connectors (included with full
power set)
ESC<>BATTERY: Dean’s Ultratm Connectors
Other: Some Velcotm “hook-and-loop” tape, and double-sided
tape is handy to secure radio gear and battery
HP-Z3019-12
Battery
Prop Volts Amps RPM Watts
HP-LVX2500-3S APC12×6E 10.32 36.7 7965 379
APC12×8E ** 10.07 42.1 7320 424
APC13×6.5E 10.12 41.6 7350 421
|
