Hyperion Titan

ESC Data

The Titan Brushless Speed controllers are here, and we're very pleased with what the engineers have done. The current lineup includes 10A, 20A, 30A,50A and 80A controllers, with 10S high-voltage models coming in late September 2005. All the Hyperion brushless controllers have a rich set of programming features which can be set either by stick commands from your transmitter, via the programming interface in the Hyperion Emeter, or by Hyperion PC Cable and software.
The processor is a well-proven type, and the software is the result of nearly two years of refinement and testing. The result is extremely smooth motor starts, no matter the motor type, and high efficiency at all throttle positions.
We know there's always a debate about the usefulness of a BEC switch, but after careful consideration we asked Hyperion to include the switch on the Titan controllers BEC 50A and higher. There are times when the battery cannot be immediately disconnected after a flight, or a flight started right after connecting the battery. Especially for larger models, the switch is a safety advantage, as keeping it off insures that no one else on the same frequency will inadvertently start your motor.

NOTE: The switch is NOT intended to allow switching off and then back on to fly the model a second time. It in ONLY to keep others from operating your model before you can remove the battery. ALWAYS REMOVE THE BATTERY AS SOON AS POSSIBLE AFTER A FLIGHT. BEC switches (all controller brands) do not disconnect the controller from main flight pack; they only disconnect power to your receiver. While main flight pack is connected to the controller a small current draw always exists, even with BEC switch off. This will cause your battery to completely discharge if left connected, and that will very likely damage the battery.

See the 10A to 80A or 90A Titan Manuals, for all the specs and stick-mode programming

Warranty
Hyperion Titan brushless speed controllers are fully guaranteed against defects in material or workmanship for 12 months from date of purchase. The warranty does NOT cover damage to reverse-polarity connection of the battery, water or crash damage, nor any other claim not arising from a defect in materials or assembly. You must contact your selling dealer with details of the problem before making a return. In most cases, the problem is an issue with radio or controller setup, and can easily be resolved at no expense to you. Controllers returned without notice in which defects are not found will only be returned to the sender at his expense.