The Xplorer is a completely new design from manufacturers NAN Model. The plane was pre released to a few of the best F3J pilots in the world and early results winning Eurotour contest's and The F3J World Championships already prove this model is currently the best you can buy. If you want to be one first to purchase this model please contact us and place yourself on the order list. The model will be available in V or X tail versions.

Xplorer.

The 2008 F3J World Championship winning design!

Benedikt Feigl - 2008 World Chapion F3J with Xplorer

 

Specification
Wing span 3500mm
Fuse length 1630mm
Wing area 75.85dm2
Wing profile NAN-F3J
Tail Area 7.3dm2
Flying weight 1850-2050g

Taking Pre orders

I am the Sole Distributor

for Nan Models in Australia

Graphite 2

fully molded Cross-tail
Technical data:
Wing span 3100 mm
Wing area 63 dm2
Length 1530mm
Weight 1250 g
Wing airfoil MH 32
Stabilizer airfoil NACA63A007
Controlling elements Elevator Rudder
ailerons, flaps

In Stock $1400.00

Graphite 2

Technical data:
Wing span 3100 mm
Wing area 64.5 dm2
Length 1515mm
Ready to flight weight ( of the test models):
Glass version 1920 g
Carbon 2100 g
F3J extra light version
of kevlar 1800g
Wing airfoil MH 32
Stabilizer airfoil HT14-HT12
Controlling elements V-form tail,
ailerons, flaps

Center of gravity () is 110-112mm from the
leading edge.

In Stock $1400.00

AVA

Technical data:
Wing span 3200 mm
Wing area 73 dm2
Length 1620mm
Ready to flight weight ( of the test models):
Glider version 1020 g
Electric version with 7 cels 1800 g
Wing airfoil AG24/AG25/AG26
Controlling elements Ruder, elevator, spoiler

Center of gravity () is 100-108mm from the
leading edge.

$850.00

SUPER AVA

Specifications
Span: 3.7m (148 in)
Wing area (flat): 83.6dm2 (1296 sq in)
Wing area (projected): 82.1dm2 (1273 sq in)
Weight: from 1100g (39 oz)
Wing loading: from 15.2g/dm2 (5.0 oz/sq ft)
EDA: 11.8 degrees
Aspect ratio: 16.6

Typical Weights
Wing: 710g
Taiplane: 32g
Fin: 41g
Fuselage: 145g
Tailboom: 42g
Pushrods: 20g
Accessories: 30g
Total structure: 1020g (36.1oz)

$950.00

Mini AVA

Specifications
Span: 2.5m (98 in)
Wing area: 55dm2 (850 sq in)
Weight: from 960g (34 oz)
Wing loading: from 18g/dm2 (5.8 oz/sq ft)
Centre of gravity: 92 -102mm behind wing leading edge

$850.00

Jaro-Muller

ESPADA - RX
( F3B + F3J g l i d e r )

WING SPAN 3242 mm
LENGHT 1505 mm
WEIGHT F3J - 1800 g
F3B - 2150 g
WING SECTION HN - 785JM
WING AREA 62,7 dm2

ELEVATOR SECTION sym 9 %
ELEVATOR AREA 6,0 dm2
CONSTRUCTION FULL MOULD

Wing and Fuss bags are avalible $150.00
In Stock
For a short time only $2400.00

Jaro-Muller

Espada-RXL

WING SPAN 3700 mm
LENGHT 1615 mm
WEIGHT F3J - 1950 g
WING SECTION HN - 785JM
WING AREA 70,1 dm2

ELEVATOR SECTION sym 9 %
ELEVATOR AREA 6,0 dm2
CONSTRUCTION FULL MOULD

Wing and Fuss bags are avalible $150.00

For a short time only $2400.00

Xperience Pro
F3J competition glider
X and V-tail versions

Wing span: 3330 mm
Fuselage length: 1550 mm
Wing area: 63 dm²
Airfoil: HN 354
Tail airfoil: HN 33S
Flying weight: from 1950 g

X Tail only

 

In Stock $1800.00

Pike Perfect

Technical:
Wingspan: 3550mm, Length: 1625mm
Wing area: 74,93dm, Tail area: 7,81dm
Aspect ratio: 16,81
Wing section: PK-91A - PK-91B - PK-92 - PK-93 - PK-94
Tail section: HT-14 - HT-13
Weight: Apx. 2050-2300g depending on lay-up
SL - 68 - 68/80 - 80 - eXtreme

Europhia 2X
Wingspan 3188mm
Airfoil MW3-MW4
Weight 2400-3400g
Ballast 1000g
Control Surface Ailerons,flaps,rudder,elevator

$2195.00

Evolution F3B

by Juri Tuma

Category: F3B
Conception: Two part wing, two part elevator, x-tail
Wing span: 3130 mm
Length: 1490 mm
Wing area: 59,58 dm2
Elevator area: 5,02 dm2
Wing airfoil: M 1580 and M1585, M08
Elevator airfoil: SD 8025
Weight: from 2150g
Ballast: 900g
Maximum servo width: wing center: 12 mm, wing tip: 12 mm , fuselage: 12 mm
Construction:
Wing carbon-rohacel-glass or carbon-rohacel-carbon
Spar UMS Carbon
Tailplane glass-balsa-glass
Fuselage carbon-glass

$2300.00